14k for //////770bhp Ballistic MR2 Machine///////

[Con]

Wow would be a great track toy not sure about the seats tho

http://www.pistonheads.com/sales/2694533.htm

From the ad
This car can be insured as a classic modified and will not cost the earth,or as a kit car.

Complete show car ready for mag features and shows

Please be aware this car is very very fast and dangerous, I will not be held responsible for any injury, loss of life or any other loss resulted from mis handling of this car after it is purchased.


"Comes with stacks of history"


We are proud to represent one of our customers cars for sale built and maintained by us for the past 4 years the spec and history is below.

This car was imported in 2003 with only 9000 miles on the clock, it comes with all the relevent paper work all previous mot's and japanease documentation.

Ballistic Performance figures with dyno print outs and drag strip slips for confirmation, this car can out run bikes never mind super cars;

Tested! Bughatti Veron Destroyer upto 200mph!



Mod list/figures;



Car weight-1280kg

Bhp/ton-around 600bhp

200mph plus, car reaches 200mph@8000 fensport 3.94 final drive kit

10,000rpm limit adjustable

1.3bar-550bhp

2.6Bar 707 hub horse power and 518 lb/ft hub torque(770bhp/570lb/ft)see graph

0-60 - 2.5 seconds

0-100 - 5.9seconds

1/4 mile 10.11 seconds@146mph terminal

Mclaren/Mercedes SLR Carbon Fibre leather seats £5000each retail

Rev5 engine

Abflug Wide arch full bodykit

Mr2developments Garrett Custom GT3582R turbo with anti surge comp housing and 1.06 turbine housing rated over 750bhp plus

HKS SPF induction kit

HKS custom 421 exhaust manifold with twin external wastegate ports to one

HKS 50mm wastegate

HKS 50mm dump pipe

HKS 3" V-band down pipe

HKS custom velocity drag exhaust system 4" with 5" tip

HKS 272 exhaust camshaft

HKS 272 inlet camshaft

Mr2developments custom 5 stud adjustable camshaft pully's 10000rpm

Mr2developments custom 90lb valve springs 10000rpm

Farrea 1mm oversize racing valves

3 Step angled valve seats for high rpm 10000rpm

Inlet Bronze valve guides cut back for high flow 10000rpm

High carbon steal alloy exhaust valve guides cut back for high flow 10000rpm

New valve stem oil seals

Gas flowed and ported head

Mr2developments custom 800bhp inlet plenum reverse mount

80mm Q45 throttle boddie assembly

ARP L19 stage2 head bolts 250000psi

Fully rebuilt head

1.6mm commetic head gasket

CP 86.25mm forged pistons

Mr2developments custom Machined, cryo treated, balanced hardened rods 10000rpm

Mr2develoments Steal feather weight Crankshaft hardened cryo treated 10000rpm

ACL pro motorsport racing dura glide with triple oil feed bearings 10000rpm

Greddy Teflon supermotorsport anti stretch timing belt 10000rpm

Custom boot mount intercooler 4" thick

12" spal fan

3" pipe work

Samco hoses

Fensport tripple plate clutch

Rev 4 fully rebuilt gearbox with hardened and cryo treated 1st and 2nd with fensport 3.94 final drive kit

TRD lsd

ATS driveshaft cages

CRW driveshafts

Wolfkatz fuel rail

Wolfkatz 1150cc injectors

Walbro intank fuel pump

2 Walbro external fuel pumps

Braided fuel lines

Aeromotive fpr

2 litre swirl pot

Magnecor KV8.5mm racing plug leads

Turbosmart super sonic twin port dump valve

Apexi power fc pro racing ecu management system with launch control

Apexi hand commander control unit

Apexi type-V fully adjustable coil over suspension kit

Apexi adjustable top mounts

Apexi anti roll bar links

Speed source transmision polly mounts

Full set of polly bushes front and rear

TRD rear anti roll bar

TRD quick shift

Cusco front lower adjustable tie bars

Cusco strut braces front and rear

Hi Spec big brake kit 330mm front discs and 4 pot calliper set up

cross drilled rear discs

Red stuff racing pads

Blitz dual solonoid boost controller

60mm Inovate proffesional motorsport wideband AFR gauge

Deffi 60mm oil pressure gauge

Deffi 60mm oil temp gauge

Deffi 60mm exhaust gas temp

Deffi 60mm boost gauge

Deffi control unit

Deffi onscreen display unit

Autometer 5" rev counter with shift light

Tinted windows

Toad cat 1 alarm system

Alpine mp3 with ipod link

Subwoofer with amp custom behind seat with 800watt amp

Alpine Individual tweaters and mids up front with cross overs and 400watt amp

Abflug wide archs

Abflug front lip

Abflug side skirts

Abflug rear spats

TRD rear spoiler

Carbon fibre head light covers

Aftermarket Carbon fibre engine lid

18" Gram lights gold/crome with 200mph Rated Tyres

 

[Lee A]

Holy shoite that is mental and some shopping list to go with it but yea the seats aren't the nicest for 5k a pop.

 

[Alan_B]

Yes please. Thats scary power in a car like an mr2!

And yea, id put a cheap set of seats in cause youd be wiping **** off them everyday

 

[scub]

some spec for the money

but probably a nightmare to drive anywhere involving a corner or damp .
cant spool that turbo much before 6000 rpm hence the raised rev limit - lagtastic .
nice bit of kit tho

 

[Jonny1992]

Please be aware this car is very very fast and dangerous, I will not be held responsible for any injury, loss of life or any other loss resulted from mis handling of this car after it is purchased.

lmao nice wee disclaimer on there

and holy cr*p that is one amazing shoping list

 

[Souleh]

Wow yummy! Wheres my 6 numbers?

Would prob remove the rear lights for the OEM rev3+ ones and colour code the headlights though

 

[Con]

Wow yummy! Wheres my 6 numbers?

Would prob remove the rear lights for the OEM rev3+ ones and colour code the headlights though

Carbon fibre head light covers
agree with you about the rear lights tho

 

[richie_mck]

Wow yummy! Wheres my 6 numbers?

Would prob remove the rear lights for the OEM rev3+ ones and colour code the headlights though

x2, hit the nail on the head. Its a beaut apart from that

 

[big_pete]

That is lovely, I actually like the seats lol

 

[PacMan]

Great spec, the Abflug kit is pretty rare as well, but he has totally ruined it from being perfect by fitting ebay special front lights and rear clusters

 

[lee-r33]

Has been on and off eBay for last few weeks lol

 

[PacMan]

Yeah you love your ebay specials Lee

 

[AndyG]

Be good when you come across a set of damp crossroads

 

[tbdevpaul]

Useless for anything other than running quaters but still a beast of car. would not be a pleasant place to be in anything like normal driving conditions. Probably worth breaking for the parts alone if you could be bothered. A guy up that way in Bradford has been building monsters like that for years.

 

[PacMan]

A guy up that way in Bradford has been building monsters like that for years.

Shahid?

 

[tbdevpaul]

Thats the boy exactly mr2auto. Would build and sell engines and complete cars for fantastic value for money.

 

[pete22]

what a bargain' would have cost him 50 grand + to build

 

[tbdevpaul]

All that MR2 developments stuff is by shahid mirza. Rare parts but you would be surprised pete at the prices that shahid builds his cars for. Put your ideas of northern ireland prices in the bin for tuning full stop.

He was at one stage selling 450BHP MR2's built and ready to go for around 10-12K I think including a car. I remember when I was doing my built he sold a fully forged engine without the turbo and ancillaries for under a grand. LOL

 

[Boydie]

Very impressive!!

 

[tbdevpaul]

here is a typical car of his

MR2 REV3 TURBO WIDE ARCH MONSTER | eBay UK

 

[StephenMcC]

Some Spec List,

Would Remove All The Exterior Parts Minus Arches For A Slightly More Sleeper Look Though.

 

[PacMan]

Thats the boy exactly mr2auto. Would build and sell engines and complete cars for fantastic value for money.

Yeah met him a few years ago, good lad indeed

 

[PacMan]

here is a typical car of his

MR2 REV3 TURBO WIDE ARCH MONSTER | eBay UK

lol, i assume someone is making replicas of the Abflug kit then? Kinda takes away the exclusivity of an original JDM part when someone rips it off and every tom **** & harry can have it for a couple of quid

 

[roverspeed]

lol, i assume someone is making replicas of the Abflug kit then? Kinda takes away the exclusivity of an original JDM part when someone rips it off and every tom **** & harry can have it for a couple of quid

Same thing happens with the all the JDM stuff.

They do however charge silly money, the copies are never up to the quality of the original. As always, you get what you pay for.

Perfect comparison is the Garage Vary MX5 lips, ebay specials look the same, but smash at the first sight of a speed bump.

Will be the same with this kit, will be Fibre Glass crap.

On another note, they blended the extended wheelarches in, why did they leave the indents for the bolts??

 

[tbdevpaul]

Yeah MR2 auto I met him when he had the Iron Man MR2 think that touched 900Bhp ish. He knew his stuff engine wise not so much styling wise. Most kits for the MR2 are fake as the originals are probably all wrecked through hedges by now.

A mate of mine was searching for a toms rear centre panel for years. Saw it in a japanese movie and was just obsessed with it but never found one LOL