natogreen16v
RMS Regular
After a lot of interest in the Members section on Club Polo here are the details. I know a lot of lads on here are building kit cars, minis, etc so thought it might be helpful for folks here to make use of this.
After debating over and over I decided to go for a Nodiz Igniton management system for my AFH engine. I contacted Matt who’s behind them and I was offered a group buy deal. The deal is 6 kits or more is 20% off and 9 kits or more is 30% off.
The mini guys and kit car guys have done a few group buys and are giving good reports back on the kits.
Kit is:
NODIZ Pro unit, with Bluetooth Dongle, and unterminated loom, which is offered for: £210 INC VAT for 9 or more and £240 INC VAT for 6 kits or more (this kit usually costs £299 INC VAT)
As you can see normal retail is comparable to a Megajolt setup, only theres alot less wiring (as no need for an EDIS module) and lots of extras like:
Matt is very helpful from what I can see online and is able to answer any questions anyone has regarding the kit.
Check out the Nodiz site (www.nodiz.co.uk) and read the tech guides on fitting or download the user manual. Even to set up base settings to get the engine running is ridiculously simple.
He can also offer 10% off the trigger wheels etc if needed or we can source our own.
I'll PM the link to everyone in the original thread in the members section.
I'll get the ball rolling here:
1. @natogreen16v - Connor
2. @Fatman - Stefan
3.
4.
5.
6.
7.
8.
9.
Connor
After debating over and over I decided to go for a Nodiz Igniton management system for my AFH engine. I contacted Matt who’s behind them and I was offered a group buy deal. The deal is 6 kits or more is 20% off and 9 kits or more is 30% off.
The mini guys and kit car guys have done a few group buys and are giving good reports back on the kits.
Kit is:
NODIZ Pro unit, with Bluetooth Dongle, and unterminated loom, which is offered for: £210 INC VAT for 9 or more and £240 INC VAT for 6 kits or more (this kit usually costs £299 INC VAT)
As you can see normal retail is comparable to a Megajolt setup, only theres alot less wiring (as no need for an EDIS module) and lots of extras like:
- 16 Load by 16 Speed Sites, with full 3D interpolation and user definable Speeds/Loads.
- User settable RPM Soft and Hard Cut Rev Limiters.
- In-built coil drivers, no need for EDIS or other modules.
- Coolant based ignition adjustment map (To add advance to cold engines, etc.).
- Intake Air Temperature ignition adjustment map, to allow timing retarding based on intake temperature to reduce pinking on very high intake temperatures.
- Cranking based advance angle to help start high compression engines.
- A programmable Shift Light output.
- 5v Tachometer Output.
- Launch Control :: Customer Video
- A programmable output based on either RPM (i.e. V-TEC control), coolant temperature (i.e. Fan Control) or Intake temperature (i.e. Water Injection control).
- Android Phone based Digital Dash (no call for a digital dash or dash clocks at all when you can make a cradle for your phone and have a real digital display with datalogging?) This is what sold it for me personally. Customer Video of NODIZ Dash in use http://www.youtube.com/watch?v=x-UbGxYk2pk
Matt is very helpful from what I can see online and is able to answer any questions anyone has regarding the kit.
Check out the Nodiz site (www.nodiz.co.uk) and read the tech guides on fitting or download the user manual. Even to set up base settings to get the engine running is ridiculously simple.
He can also offer 10% off the trigger wheels etc if needed or we can source our own.
I'll PM the link to everyone in the original thread in the members section.
I'll get the ball rolling here:
1. @natogreen16v - Connor
2. @Fatman - Stefan
3.
4.
5.
6.
7.
8.
9.
Connor
