Oil catch can fitting/install question

[CraigRX8]

Ok so my rx8 seems to be getting too much oil in to the air box from the engine. its possible to see a stain in the filter.

Here is a picture of an rx8 engine bay

and a closer picture of the actual tubing

I take it its just a matter of breaking into this?

 

[Paul RS]

I would expect there to be more than one breather? Cossie engines have 2 point on the block that you take a breather from plus then a return to the sump.

To be honest i'd not be worried about a tiny bit of oil on the filter.

 

[CraigRX8]

I wouldnt either, i know its normal but it wasnt a tiny bit it was quite a bit more than id expect. i have the catch can so im going to install it anyway. There could be two breathers i havent traced the second tube coming out by the MAf sensor yet, basically because its wet outside and i cant be bothered.