My evo 7 WIP

McFall1984

RMS Regular
Messages
10,748
Location
Dungannon
Drives
To many cars
So I was bored of having no good car to clean or buy stuff for, wanted an Evo X but nothing stood out, but a 7 did in Scotland, called the seller on the Friday evening, booked the flight Saturday an home Saturday night

So it's 01 Evo 7. Good slap of history

Drove well an by the sellers add, had missed out an loads of things the car had that would have made the car more expensive

Pics as we got to the boat 11pm 🤢
PXL_20221105_203354400.jpg
PXL_20221105_203359356.jpg


On the boat 11.30
PXL_20221105_232230890.jpg


Next day I took it for a run an 1 rough set of pictures
PXL_20221113_110726210.jpg
PXL_20221113_110754591.jpg
PXL_20221113_110742327.jpg
PXL_20221113_110801318.jpg
PXL_20221113_110826346.jpg
PXL_20221113_110856113.jpg
PXL_20221113_110935516.jpg
PXL_20221113_111104520.jpg

PXL_20221113_111116366.jpg


So 1st thing I spotted was the 8 bumper and wheels, the spotted the spoiler an said it's got half an 8 kit
Then seen the K-sport front brakes, inside has 8MR interior including dash, clocks an dash loom/ECU

Turns out the car has all 8MR running gear, from engine, box, transfer box, diff, clocks, dash, loom, ECU, only thing isn't 8 is shell and bonnet

But I always wanted a yellow Evo so that's were it started
 

McFall1984

RMS Regular
OP
McFall1984
Messages
10,748
Location
Dungannon
Drives
To many cars
Then the father in law got wind of the job he never knew he had 😂 painting it

Front bumper roughly mounted up, missing brackets to hold the bumper, currently on route from Japan, bumper was rubbed an filled, it was in rough shape to be fair
PXL_20230427_125111490.jpg


Discs been sent off for a skim, 2 piece discs were just a bit scabby from lying up, actually called the engineer guy that said there ready, so will get them this week hopefully
PXL_20230427_114529169.jpg


Trial fitted the wings after removing the FPR rubbish
IMG-20230218-WA0074.jpg
IMG-20230218-WA0075.jpg


Then he got some paint mixed to see how it looked
IMG-20230505-WA0011(1).jpg
IMG-20230505-WA0010(1).jpg


But I thought it was to Goldy/dark so I got a brighter yellow

PXL_20230624_150116785.jpg


So up to now we have the passenger side all ready for paint, doors, wings an bumper all in primer ready also
PXL_20230624_180752605.jpg
PXL_20230624_180824892.jpg
PXL_20230624_180829555.jpg
PXL_20230624_180834744.jpg
 

McFall1984

RMS Regular
OP
McFall1984
Messages
10,748
Location
Dungannon
Drives
To many cars
Class! 7s where my favourite!
Regretted selling my palma red 8MR last year or the year before. This 1 will be kept. Have plans for this 1 🙈
proper yellow
He likes the darker shade that he sprayed a bit of the A an B pillar but I wanted a brighter in your face yellow.
Car was originally tarmac black, then painted yellow at some stage, then grey in 2014. So I was toying with Bayside blue, midnight purple. But said I always wanted a yellow evo, so in 2-3 weeks. Hopefully it will be painted. But I'm stepping back from this now an letting him work away, I wanna work on my btcc cavalier build
 

McFall1984

RMS Regular
OP
McFall1984
Messages
10,748
Location
Dungannon
Drives
To many cars
4 doors now ready for paint
The above short vid isn’t the both sides finished. He’s gonna paint the doors with 4-5 light coats just to give the doors a good base. Finish the inside of the doors completely. Refit the doors
Paint the wings with 4-5 light coats, refit then we will flag the both sides and finally run a few final coats over the both sides to finish both sides
IMG_7292.jpeg
IMG_7291.jpeg
IMG_7290.jpeg
IMG_7289.jpeg
 

McFall1984

RMS Regular
OP
McFall1984
Messages
10,748
Location
Dungannon
Drives
To many cars
Front bumper, skirts and wing in gloss
Bumper and skirts are finished
Other wing needs another coat
IMG_7425.jpeg
IMG_7426.jpeg
IMG_7427.jpeg

Then started wet an dry on the doors
IMG_7430.jpeg
IMG_7432.jpeg
IMG_7433.jpeg


2 doors down, 2 to go

We ended up getting a yellow base coat as the gloss was taking loads of coats to kill the primer. 2 hits with yellow base coat and a few with gloss

Inside of the 4 doors are finished. So once the other 2 get rubbed they will be painted and then fitted to the car

Then both complete sides will get a few hits with gloss and will be done

Need a bootlid as the 1 I got is rotten
IMG_7428.jpeg
IMG_7429.jpeg
 
Top