big_pete
RMS Regular
Nothing at all. Mine is faultless with 206k, didn't need a single thing for mot not one single fault lol
Mine was like the menu from Yoko! Doubt it had ever seen a scanner before lol
Nothing at all. Mine is faultless with 206k, didn't need a single thing for mot not one single fault lol
Another day another problem fixed.
Boot solenoid, keyfob boot release and bootlid lights all fixed.
Pics;
Had to do the same on the 5 series I did it place handy enough we jobThere were about 4 wires broken and another 5 or 6 on the verge of breaking in the flexi at the boot hinge.
So any that looked suspect were cut, soldered and heatshrink wrapped.
It has left the flexi a little stiff but should be ok.
Anyone ever had to take the needles off the instrument cluster?
I had to take mine off in order to resolder an LED for the airbag light back onto the board (previous owner had prised it off )
RPM & temp gauge are fine.
MPG & Fuel level I cant really tell
Speedo is under reading as well.
Is there a foolproof way of resetting/ calibrating them?
Anyone ever had to take the needles off the instrument cluster?
I had to take mine off in order to resolder an LED for the airbag light back onto the board (previous owner had prised it off )
RPM & temp gauge are fine.
MPG & Fuel level I cant really tell
Speedo is under reading as well.
Is there a foolproof way of resetting/ calibrating them?